ZyXEL Communications XS3800-28, User Manual, Page: 259 / 789

Chapter 35 Link Layer Discovery Protocol (LLDP)
XS3800-28 User’s Guide
259
Longitude Enter the longitude information. The value should be from 0º to 180º.
• west
• east
Altitude Enter the altitude information. The value should be from –2097151 to 2097151 in meters or in
floors.
• meters
• floor
Datum Select the appropriate geodetic datum used by GPS.
• WGS84
• NAD83-NAVD88
• NAD83-MLLW
Civic Address Enter the Civic Address by providing information such as Country, State, County, City, Street,
Number, ZIP code and other additional information. Enter at least 2 fields in this configuration
including the Country. The valid length of the Country field is 2 characters and all other fields
are up to 32 characters.
• Country
• State
• County
• City
• Division
• Neighbor
• Street
• Leading-Street-Direction
• Street-Suffix
• Trailing-Street-Suffix
• House-Number
• House-Number-Suffix
• Landmark
• Additional-Location
• Name
• Zip-Code
• Building
• Unit
• Floor
• Room-Number
• Place-Type
• Postal-Community-Name
• Post-Office-Box
• Additional-Code
ELIN Number Enter a numerical digit string, corresponding to the ELIN identifier which is used during
emergency call setup to a traditional CAMA or ISDN trunk-based PSAP. The valid length is
from 10 to 25 characters.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Clear Click Clear to clear the fields to the factory defaults.
Cancel Click Cancel to not save the configuration you make and return to the last screen.
Table 113 PORT > LLDP > LLDP MED > LLDP-MED Location > Add/Edit (continued)
LABEL DESCRIPTION