ZyXEL Communications XS3800-28, User Manual, Page: 365 / 789

Chapter 50 Queuing Method
XS3800-28 User’s Guide
365
Hybrid-SPQ
Lowest-
Queue This field is applicable only when you select WFQ or WRR .
Select a queue ( Q0 to Q7 ) to have the Switch use SPQ to service the subsequent queues after and
including the specified queue for the port. For example, if you select Q5 , the Switch services traffic on
Q5 , Q6 and Q7 using SPQ .
Select None to always use WFQ or WRR for the port.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these changes if
it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to
the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 174 SWITCHING > QoS > Queuing Method (continued)
LABEL DESCRIPTION