ZyXEL Communications XS3800-28, User Manual, Page: 180 / 789

Chapter 24 IPv6
XS3800-28 User’s Guide
180
Figure 124 SYSTEM > IPv6 > DHCPv6 Client Setup
The following table describes the labels in this screen.
24.11.1 Edit DHCPv6 Client
Use this screen to configure the Switch’s DHCP settings when it is acting as a DHCPv6 client. Select an
entry and click
Edit in the SYSTEM > IPv6 > DHCPv6 Client Setup screen to display this screen.
Figure 125 SYSTEM > IPv6 > DHCPv6 Client Setup > Edit
Table 67 SYSTEM > IPv6 > DHCPv6 Client Setup
LABEL DESCRIPTION
Index This is the interface index number.
Interface This is the name of the IPv6 interface you created.
IA-NA This field displays whether the Switch obtains a non-temporary IP address from the DHCPv6 server.
Rapid-Commit This field displays whether the Switch obtains information from the DHCPv6 server by a rapid two-
message exchange.
DNS This field displays whether the Switch obtains DNS server IPv6 addresses from the DHCPv6 server.
Domain-List This field displays whether the Switch obtains a list of domain names from the DHCP server.
Information
Refresh
Minimum This field displays the time interval (in seconds) at which the Switch exchanges other configuration
information with a DHCPv6 server again.
Select an entry’s check box to select a specific entry.
Edit Click Edit to edit the selected entry.