ZyXEL Communications XS3800-28, User Manual, Page: 608 / 789

Chapter 82 IP Source Guard
XS3800-28 User’s Guide
608
Port Specify the ports in the binding. If this binding has one port, select the first radio button and
enter the port number in the field to the right. In Stacking mode, the first field is the slot ID and
the second field is the port number. If this binding applies to all ports, select
Any .
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Clear Click Clear to clear the fields to the factory defaults.
Cancel Click Cancel to not save the configuration you make and return to the last screen.
Table 325 SECURITY > IPv4 Source Guard > IP Source Guard > Static Binding > Add/Edit (continued)
LABEL DESCRIPTION