ZyXEL Communications XS3800-28, User Manual, Page: 742 / 789

Chapter 88 Networked AV Mode
XS3800-28 User’s Guide
742
88.40 What You Can Do
• Use the Restore Configuration screen ( Section 88.41 on page 742 ) to upload a stored device
configuration file.
• Use the Backup Configuration screen ( Section 88.42 on page 742 ) to save your configuration for later
use.
• Use the Save Configuration screen ( Section 88.43 on page 743 ) to save the current configuration
settings to a specific configuration file on the Switch.
• Use the Firmware Upgrade screen ( Section 88.44 on page 744 ) to upload the latest firmware.
• Use the Reboot System screen ( Section 88.45 on page 744 ) to restart the Switch without physically
turning the power off and load a specific configuration file.
• Use the Tech-Support screen ( Section 88.46 on page 745 ) to create reports for customer support if
there are problems with the Switch.
88.41 Restore Configuration
Use this screen to restore a previously saved configuration file from your computer to the Switch.
Click MAINTENANCE > Configuration > Restore Configuration to access this screen.
Figure 592 MAINTENANCE > Configuration > Restore Configuration
1
Click Choose File or Browse to locate the configuration file you wish to restore.
2
After you have specified the file, click Restore .
The Switch will run on the restored configuration after the restore process.
Figure 593 Configuration Restoring
88.42 Backup Configuration
Backing up your Switch configurations allows you to create various “snap shots” of your device from
which you may restore at a later date. Use this screen to back up your current Switch configuration to a
computer.