ZyXEL Communications XS3800-28, User Manual, Page: 735 / 789

Chapter 88 Networked AV Mode
XS3800-28 User’s Guide
735
Figure 587 SWITHCING > VLAN > Static VLAN > Add/Edit
The following table describes the related labels in this screen.
Table 399 SWITHCING > VLAN > Static VLAN > Add/Edit
LABEL DESCRIPTION
Active Enable the switch button to activate the VLAN settings.
Name Enter a descriptive name for the VLAN group for identification purposes. This name consists of up
to 64 printable ASCII characters. The string should not contain [ ? ], [ | ], [ ' ], [ " ] or [ , ].
VLAN Group ID Enter the VLAN ID for this static entry; the valid range is between 1 and 4094.
VLAN Type Select Normal (static) or Private . For Private VLANs, select Primary , Isolated or Community .
Association
VLAN List Primary private VLANs can associate with several (secondary) Community private VLANs and up
to one (secondary) Isolated private VLAN.
You only configure VLAN Association List for Primary private VLANs. Use a dash to associate
consecutive VLANs and a comma (no spaces) to associate non-consecutive VLANs. For
example, 51–53 includes 51, 52 and 53, but 51,53 does not include 52.
Secondary private VLANs can only be associated with one primary private VLAN.
Port The port number identifies the port you are configuring.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.