ZyXEL Communications XS3800-28, User Manual, Page: 532 / 789

Chapter 72 VRRP
XS3800-28 User’s Guide
532
72.2 VRRP Status
Click NETWORKING > VRRP in the navigation panel to display the VRRP Status screen as shown next.
Figure 421 NETWORKING > VRRP > VRRP Status
The following table describes the labels in this screen.
72.3 VRRP Setup
The following sections describe the different parts of the VRRP Setup screen.
72.3.1 IP Interface Setup
Before configuring VRRP, first create an IP interface (or routing domain) in the SYSTEM > IP Setup screen.
Click NETWORKING > VRRP > VRRP Setup to display the screen as shown next.
Table 286 NETWORKING > VRRP > VRRP Status
LABEL DESCRIPTION
Index This field displays the index number of a rule.
Network This field displays the IP address and the subnet mask bits of an IP routing domain that is
associated to a virtual router.
Virtual Router ID This field displays the ID number of the virtual router.
Virtual Router
Status This field displays the status of the virtual router.
This field is Master indicating that this Switch functions as the master router.
This field is Backup indicating that this Switch functions as a backup router.
This field displays Init when this Switch is initiating the VRRP protocol or when the Uplink Status
field displays Dead .
Uplink Status This field displays the status of the link between this Switch and the uplink gateway.
This field is Alive indicating that the link between this Switch and the uplink gateway is up.
Otherwise, this field is Dead .
This field displays Probe when this Switch is check for the link state.
Poll Interval(s) The text box displays how often (in seconds) this screen refreshes. You may change the refresh
interval by typing a new number in the text box and then clicking
Set Interval .
Stop Click Stop to halt system statistic polling.