ZyXEL Communications XS3800-28, User Manual, Page: 77 / 789

Chapter 4 Web Configurator
XS3800-28 User’s Guide
77
IPv6 Global
Setup
This link takes you to a screen where you can configure the global IPv6 settings.
IPv6
Interface
Setup
This link takes you to a screen where you can view and configure IPv6 interfaces.
IPv6
Addressing
This link takes you to a screen where you can view and configure IPv6 link-local and global
addresses.
IPv6
Neighbor
Discovery
This link takes you to a screen where you can view and configure neighbor discovery settings on
each interface.
IPv6
Neighbor
Setup
configure static IPv6 neighbor entries in the Switch’s IPv6 neighbor table.
DHCPv6
Client
Setup
This link takes you to a screen where you can configure the Switch’s DHCP settings when it is act-
ing as a DHCPv6 client.
Logins This link takes you to a screen where you can change the system login password, as well as con-
figure up to four login details.
SNMP This link takes you to screens where you can specify the SNMP version and community (password)
values, configure where to send SNMP traps from the Switch, enable loopguard/errdisable/poe/
linkup/linkdown/lldp/transceiver-ddm/storm-control on the Switch, specify the types of SNMP
traps that should be sent to each SNMP manager, and add/edit user information.
Stacking This link takes you to screens where you can view the stacking status in the stacking system,
enable stacking on the Switch, and configure stacking details.
Switch Setup This link takes you to a screen where you can set up global Switch parameters such as VLAN type.
Syslog Setup This link takes you to a screen where you can configure the Switch’s system logging settings and
configure a list of external syslog servers.
Time Range This link takes you to a screen where you can configure time range for time-oriented features like
Classifier.
PORT
Flex Link This screen takes you to a screen where you can view configure backup links in the Data Link
layer.
Green Ethernet This link takes you to a screen where you can configure the Switch to reduce port power con-
sumption.
Link Aggrega-
tion This link takes you to a screen where you can logically aggregate physical links to form one logi-
cal, higher-bandwidth link.
LLDP Click the link to unfold the following sub-link menu.
LLDP This link takes you to screens where you can view LLDP information and configure LLDP and TLV
settings.
LLDP MED This link takes you to screens where you can configure LLDP-MED parameters.
OAM This link takes you to screens where you can enable Ethernet OAM on the Switch, view the config-
uration of ports on which Ethernet OAM is enabled and perform remote-loopback tests.
Port Setup This link takes you to a screen where you can configure settings for individual Switch ports.
ZULD This link takes you to screens where you can enable ZULD on a port and configure related set-
tings.
SWITCHING
Layer 2 Proto-
col Tunneling This link takes you to a screen where you can configure L2PT (Layer 2 Protocol Tunneling) settings
on the Switch.
Loop Guard This link takes you to a screen where you can configure protection against network loops that
occur on the edge of your network.
Table 18 Navigation Panel Links (Standard Mode) (continued)
LINK DESCRIPTION