ZyXEL Communications XS3800-28, User Manual, Page: 91 / 789

Chapter 5 Initial Setup Example
XS3800-28 User’s Guide
91
Figure 53 Initial Setup Network Example: Port VID
1
Go to the SWITCHING > VLAN > VLAN Setup > VLAN Port Setup screen.
2
Enter 2 in the PVID field for port 1 and click Apply to save your changes back to the run-time memory.
Settings in the run-time memory are lost when the Switch’s power is turned off.
5.1.3 Configure Switch Management IP Address
If the Switch fails to obtain an IP address from a DHCP server, the Switch will use 192.168.1.1 as the
management IP address. You can configure another IP address in a different subnet for management
purposes. The following figure shows an example.