Xerox ColorQube 9303 Series, Service Manual, Page: 563 / 1812

February 2013
2-539 ColorQube® 9303 Family
OF 4a
Status Indicator RAPs
Table 4 Chain 04 Status codes
Status
Code
UI Message Reason for Message Reference / Action
04-565-00 System error. Power
off then on and notify
system administrator
IME controller commu-
nication failure System fault. Switch the machine
off then on,
GP 14
04-568-00 The output tray is
full. Empty the output
tray
The OCT is full. Empty the tray.
04-569-00 The output tray is
almost full
The OCT detects that it
is 90% full The tray is almost full. The tray
may be emptied now or when it is
full. Printing and other machine
services are unaffected
Table 5 Chain 05 Status codes
Status
Code
UI Message Reason for Message Reference / Action
05-501-00 No message The DADH is raised. Close the DADH. If the
fault remains, perform
the
05-300-00 DADH
Open RAP.
05-502-00 The document feeder top
cover is open
The DADH top cover is open. Close the DADH top
cover. If the fault
remains, perform the
05-258-00, 05-307-00
DADH Cover Interlock
Open RAP.
05-520-00 Paper jam in the docu-
ment feeder
Post feed and takeaway roll
jam Remove the sheet. If
the problem persists,
perform the
05-330-00,
05-331-00 Feed Sen-
sor Failure RAP
05-522-00 Paper jam in the docu-
ment feeder
A sheet is left over the DADH
CVT sensor, the DADH post
feed sensor or the TAR sen-
sor after a jam. Remove sheet. If the
problem persists, per-
form the
05-350-00,
05-352-00 RAP
05-525-00 No message The Document feeder tray is
empty Perform the 05B
DADH Document Sen-
sor Failure RAP
05-526-00 Paper jam in the docu-
ment feeder
A sheet is left over the DADH
document present sensor
after a jam. The 05-330 fault
is raised The fault is reset when
DADH top cover
closed after jam
cleared. If the problem
persists, perform the
05-330-00, 05-331-00
RAP
05-527-00 Reload sheets in docu-
ment feeder
Documents are in the DADH
at power on or exit from
power save Remove the sheets
from the original input
tray
05-535-00 No message Document feeder tray loaded -
05-538-00 Communication error.
Power off then on and
notify system administra-
tor
The DADH is not available. A document feeder
fault has occurred,
copy jobs can only be
made from the docu-
ment glass. Printing
can continue.
05-539-00 Document feeder - feed
roller has been replaced
DADH feed head CRU
replaced. Message automati-
cally cleared half a second
after setting None
05-542-00 Communication error.
Power off then on and
notify system administra-
tor
DADH document transport
needs service Perform 05A RAP
05-546-00 The document size was
different than expected.
The job has been deleted
On pre-feed the DADH fails to
recognize the size of the doc-
ument Reload the originals or
select the document
size. If the problem
persists, perform the
05-257-00 RAP
05-547-00 Re-order document
feeder - feed roller but
DO NOT replace until
prompted
DADH feed roll assembly
near end of life Re-order a feed roll
assembly
PL 5.15 Item
1 .
05-560-00 Remove the document. It
is too short to be fed by
Document Feeder.
Upon fault 05-310 being
raised Remove the short doc-
ument from DADH dur-
ing jam clearance, If
the problem persists,
perform the
05-310-00
RAP
05-570-00 Scan and copy services
not available. Print ser-
vice is available
DADH jam Remove, then re-load
all document in the
DADH
Table 5 Chain 05 Status codes
Status
Code
UI Message Reason for Message Reference / Action