Xerox ColorQube 9303 Series, Service Manual

Page: 157 / 1812

February 2013
2-133 ColorQube® 9303 Family
12-198-00-171, 12-199-00-171, 12-288-00-171, 12-
Status Indicator RAPs
Figure 1 Component location
12-288-00-171, 12-289-00-171 HVF Nip Split RAP
12-288-00-171 The nip split has failed to operate.
12-289-00-171 The nip split has failed to return to the home position.
Initial Actions
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
GP 14 . Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
• Check for a jam or other obstruction in the nip split.
• Check the nip split for damage.
Procedure
Enter dC330 , code 12-264 to run the nip split motor, MOT12-264, Figure 1 . The nip-split
mechanism can be heard.
Y
N
Go to
WD 12.8 . Check MOT12-264.
Refer to:
• GP 10 How to Check a Motor.
• 12A-171 HVF Power Distribution RAP.
• 01L 0V Distribution RAP
Install new components as necessary:
• Nip split motor, PL 12.125 Item 15 .
• HVF PWB, PL 12.140 Item 2 .
Enter dC330 code 12-088. Manually actuate the nip home sensor, Q12-088, Figure 1 . The
display changes.
Y
N
Go to
WD 12.7 . Check Q12-088.
Refer to:
• GP 11 How to Check a Sensor.
• 12A-171 HVF Power Distribution RAP.
• 01L 0V Distribution RAP
Install new components as necessary:
• Nip home sensor, PL 12.135 Item 1 .
• HVF PWB, PL 12.140 Item 2 .
Enter dC330 code 12-091. Manually actuate the nip split sensor, Q12-091. The display
changes.
Y
N
Go to
WD 12.7 . Check Q12-091.
Refer to:
• GP 11 How to Check a Sensor.
• 12A-171 HVF Power Distribution RAP.
• 01L 0V Distribution RAP
Top tray exit
sensor Q12-107
Compile exit
sensor
Q12-106
Buffer path sensor
Q12-321
HVF booklet exit sensor
Q12-087
Buffer position sensor
Q12-086
Entry sensor
Q12-077
A