Xerox ColorQube 9303 Series, Service Manual, Page: 1369 / 1812

February 2013
6-77 ColorQube® 9303 Family
GP 25, GP 26
General Procedures/Information
GP 25 First Copy/Print Out Time and Power On/Off Time
The first copy out time (FCOT) is from the start copy request to the delivery of the first copy in
the OCT. Values in
Table 1 are based on a standard job where the original is copied at 100%
from the document glass or DADH onto A4 LEF paper fed from the bypass tray.
The first print out time (FPOT) is from the print job request to the delivery of the print in the
OCT. FPOT values in
Table 1 are based on a 1 byte ASCII text file sent using TCP/IP and LPR,
from a Pentium II 128Mb NT 4.0 PC with 100Mb Ethernet.
Power on / off figures in Table 1 are quoted on the basis that the machine is working in a nom-
inal ambient environment. It has been fully installed and connected to a nominal mains supply.
Is in a fully working condition (no faults or warnings present) and has had all ‘other’ model com-
patible components fully installed and pre-configured. All SAKO settings should be set to the
manufacturing default condition.
GP 26 Restriction of Hazardous Substances (RoHS)
Purpose
To give information on the RoHS Directive.
The RoHS Directive restricts the use of certain hazardous substances in electrical and elec-
tronic equipment. It applies to equipment placed in the European Union (EU) market. The
directive takes effect from 1st July 2006.
NOTE: Currently these restrictions are only for the European Union (EU) market and some
associated countries. For more information go to www.Xerox.com.
The hazardous substances are:
• Lead (Pb)
• Mercury (Hg)
• Cadmium (Cd)
• Hexavalent Chromium (Cr 6+, Cr [VI])
• Polybrominated Diphenyl Ethers (PBDE’s)
• Polybrominated Biphenyls (PBB’s)
Identification of a RoHS Compliant Machine
Xerox will maintain a central list of RoHS compliant machines.
This general procedure is for information only. All ColorQube 9301/9302/9303 machines are
RoHS compliant.
Table 1 Machine Response Time
Description
9301/9302/9303
(15A)
9301/9302/9303
(20A) Notes
FCOT from the document
glass. 9 seconds 9 seconds A4 sheet, bypass tray to
OCT in enhanced mode.
FCOT from the DADH. 11 seconds 11 seconds A4 sheet, bypass tray to
OCT in enhanced mode.
FPOT 8 seconds 8 seconds A4 sheet, bypass tray to
OCT in enhanced mode.
Warm up from low power
mode. 26 seconds 26 seconds From low power mode to
ready to copy or scan.
Warm up time from sleep
mode.
Ready to print or copy 2 minutes 46
seconds. 2 minutes 30
seconds. Ready to print or copy (scan
and mark)
Power on time to ready to
copy. 9 minutes 24
seconds. 9 minutes 24
seconds. Ready to copy (scan and
mark)
Power on time to ready to
print. 9 minutes 24
seconds. 9 minutes 24
seconds. Ready to print (receive and
mark)
Power on time to ready to
Fax. 1 minute 28 sec-
onds. 1 minute 28 sec-
onds. Ready to Fax (receive and
mark)
Power off time 45 seconds 45 seconds From touch of confirmation
button on UI
Quick restart time to ready
to print 3 minutes 8 sec-
onds. 3 minutes 8 sec-
onds. From re-start option con-
firmed, to ready to print
(receive and mark).
Ready to Fax time from
sleep mode time. 2 minutes 46
seconds. 2 minutes 30
seconds. From activity detected on
the Fax line to start of paper
feed.