Shihlin SA3 Series, User Manual

Page: 342 / 423

Appendix 1 Parameter table
APPENDIX 340
Parameter
Number
Group Name Setting Range Default Page
P.345 05-35
Second motor (PM) q-axis
inductance 0～650.00mH
99999 178
99999
P.346 05-36
Second motor (PM) Back-EMF
coefficient
0～6500.0V/krpm
99999 178
99999
P.347 05-37
Second motor (PM) Phase Z
origin pulse compensation 0～359.9°
99999 178
99999
P.349 09-00 Encoder type
0：ABZ
0 238
1：ABZ (For synchronous motor)
2：Resolver 1x synchronous motor standard
encoder
3：ABZ/UVW synchronous motor standard
encoder
P.350 09-01 Encoder pulse 1 0～20000 1024 238
P.351 09-02 Encoder input type 1
0：Off
0 238
1：A/Phase B pulse wave，forward spin if Phase
A is over Phase B for 90 degrees
2：A/Phase B pulse wave，forward spin if Phase
B is over Phase A for 90 degrees.
3：Phase A :pulse wave，Phase B:directional
sign，L:reverse spin，H:forward spin
4：Phase A :pulse wave，Phase B: directional
sign，L:forward spin，H:reverse spin
P.352 09-03 PG error detection time 0～100.0s 1.0s 240
P.353 09-04 Over-speed detection frequency 0～30.00Hz 4.00Hz 240
P.354 09-05 Over-speed detection time 0～100.0s 1.0s 240
P.355 09-06 Encoder pulse 2 0～20000 2500 240
P.356 09-07 Encoder input type 2
0：Off
0 240
1：A/Phase B pulse wave, forward spin if Phase
A is over Phase B for 90 degrees
2：A/Phase B pulse wave，forward spin if Phase
B is over Phase A for 90 degrees
3：Phase A :pulse wave，Phase B:directional
sign，L:reverse spin，H:forward spin
4：Phase A :pulse wave，Phase B: directional
sign，L:forward spin，H:reverse spin
P.357 09-08 Frequency division output setting 1～255 1 241
P.358 09-09
Frequency division filter
coefficiency setting
0～255 0 241
P.359 09-10 Electronic gear ratio 0～65.535 1.000 242
P.360 09-11 Anti-reversal detection pulse 0～65535 0 242
P.361 09-12 Reversal detection frequency 0～65535 0 242