Shihlin SA3 Series, User Manual

Page: 226 / 423

PID parameter group 08
PARAMETER DESCRIPTION 224
Group
Parameter
Number
Name Setting Range Default Page
08-27 P.714 PID deviation control limit 0～100.00% 0.00% 231
08-28 P.715 Integral separated property
0: Off
0 232
1: Integral separated
08-29 P.716 Integral separated point 0～100.00% 50.00% 232
08-30 P.717 PID differential limit 0～100.00% 0.10% 232
08-31 P.718 PID output positive deviation limit 0～100.00% 100.0% 233
08-32 P.719 PID output negative deviation limit 0～100.00% 100.0% 233
08-33 P.720
PID parameter switch-over operation
selection
0: No PID parameter switch-over.
0 233 1: PID parameter switch-over based on
deviation.
08-34 P.721
PID parameter switch-over deviation
lower limit
0～100.00% 20.00% 233
08-35 P.722
PID parameter switch-over deviation
upper limit
0～100.00% 80.00% 233
08-36 P.723 PID disconnection operation option 1
0: Select no need to run to the upper limit
when PID is disconnected
1 234
1: Select need to run to the upper limit when
PID is disconnected
08-39 P.726
PID counting when inverter stop action
selection 0: PID stop counting when inverter stop
0 234
1: PID keep counting when inverter stop
08-40 P.727
PID allowed reverse rotation action
selection
0: PID does not allow reverse rotation
0 234
1: PID allows reverse rotation
08-41 P.728 PID in reverse direction integral limit 0～100.0% 0.0% 234
08-42 P.729 PID minimum output frequency 0～10.00Hz 0.00Hz 234
08-43 P.251
PID pressure range (Bar) setting
1.0~100.0 100.0
234
08-44 P.252 PID unit selAection
0: %
0
234
1: bar
2: --
3: kgs
4: kg
5: psi
6: Pa
7: kPa
8: MPa
9: C
08-45 P.253 Disconnection detection time feedback 0.0~600.0s 0.0s
235
08-46 P.254
Disconnection processing method
feedback
0: AEr alarm, inverter free stop
0
235
1: Slow down and stop, call AEr alarm
2: AEr alerts and continues running
08-50 P.724 PID target linear change time 0~650.00s 0.00s
235