Shihlin SA3 Series, User Manual

Page: 330 / 423

Appendix 1 Parameter table
APPENDIX 328
Parameter
Number
Group Name Setting Range Default Page
P.129 03-12
Terminal SO2-SE output
function
Same as 03-10(P.40) 2 150
P.130 03-13
Terminal A2-B2-C2
output function Same as 03-10(P.40)
0 150
P.131 04-19
Programmed operation
mode speed 1
0～650.00Hz 0.00 Hz 165
P.132 04-20
Programmed operation
mode speed 2
0～650.00Hz 0.00 Hz 165
P.133 04-21
Programmed operation
mode speed 3
0～650.00Hz 0.00 Hz 165
P.134 04-22
Programmed operation
mode speed 4
0～650.00Hz 0.00 Hz 165
P.135 04-23
Programmed operation
mode speed 5
0～650.00Hz 0.00 Hz 165
P.136 04-24
Programmed operation
mode speed 6
0～650.00Hz 0.00 Hz 165
P.137 04-25
Programmed operation
mode speed 7
0～650.00Hz 0.00 Hz 165
P.138 04-26
Programmed operation
mode speed 8
0～650.00Hz 0.00 Hz 165
P.139 02-11
Terminal 2-5 voltage
signal
bias rate
-100.0%~100.0% 0.0% 124
P.142 04-07 Speed 8 Same as 04-03(P.24) 99999 163
P.143 04-08 Speed 9 Same as 04-03(P.24) 99999 163
P.144 04-09 Speed 10 Same as 04-03(P.24) 99999 163
P.145 04-10 Speed 11 Same as 04-03(P.24) 99999 163
P.146 04-11 Speed 12 Same as 04-03(P.24) 99999 163
P.147 04-12 Speed 13 Same as 04-03(P.24) 99999 163
P.148 04-13 Speed 14 Same as 04-03(P.24) 99999 163
P.149 04-14 Speed 15 Same as 04-03(P.24) 99999 163
P.150 10-08 Restart mode selection
XX0: No frequency search.
0 252
XX1: Direct frequency search
XX2: Decrease voltage mode
X0X: Power on once.
X1X: Start each time.
X2X: Only instantaneous stop and restart
0XX: No rotation direction detection.
1XX: Rotation direction detection.
2XX:00-15(P.78)=0, rotation direction detection；
00-15(P.78)=1/2, no rotation direction detection.