Shihlin SA3 Series, User Manual

Page: 322 / 423

Appendix 1 Parameter table
APPENDIX 320
Parameter
Number
Group Name Setting Range Default Page
P.42 03-21
Output frequency
detection for forward
rotation
0～650.00Hz 6.00Hz 154
P.43 03-22
Output frequency
detection for reverse
rotation 0～650.00Hz
99999 154
99999: Same as the setting of 03-21(P.42)
P.44 01-22 Second acceleration time
0～360.00s/0～3600.0s
99999 110
99999: Off
P.45 01-23 Second deceleration time
0～360.00s/0～3600.0s
99999 110
99999: Off
P.46 01-24 Second torque boost
0～30.0%
99999 110
99999: Off
P.47 01-25 Second base frequency
0～650.00Hz
99999 110
99999: Off
P.48 07-03 COM1 data length
0: 8bit
0 204
1: 7bit
P.49 07-04 COM1 stop bit length
0: 1bit
0 204
1: 2bit
P.50 07-05
COM1 parity check
selection
0: No parity check
0 204 1: Odd
2: Even
P.51 07-06 COM1 CR/LF selection
1: CR only
1 204
2: Both CR and LF
P.52 07-08
COM1 Number of
communication retries
0～10 1 204
P.53 07-09
COM1 communication
interval allowed time
0~999.8s: Checking communication timeout with
the set value
99999 204
99999: No timeout check
P.54 02-04
Terminal AM1 output
function
0: Output frequency, use 02-51 (P.55) value as
100%.
0 121
1: Output current, use 02-52 (P.56) value as 100%.
2: Output DC bus voltage, use the
OV trigger
voltage as 100%.
3: Output inverter temperature accumulate rising
rate, use NTC trigger level as 100%.
4: Output inverter thermal relay accumulate rate,
use the digital thermal relay trigger level ( 06-00
( P.9 ) ≠ 0 ) or the thermal relay on IGBT trigger
level ( 06-00 (P.9) = 0) as 100%.
5: Target frequency, use 02-51(P.55) value as
100%.
6: Fixed output, voltage or current output level can
be set by 02-54 (P.541)
7: Output voltage, use inverter rated voltage as
100%