System parameter group 00
PARAMETER DESCRIPTION 87
Group
No.
Name
Group
No.
Name
03-62
P.588
Monitor expanded Slot2 digital output
terminal state
06-55
P.751 E12
06-56
P.752 E1 alarm output frequency
06-01
P.22
Stall prevention operation level
06-57
P.753 E1 alarm output current
06-08
P.155 Over torque detection level
06-58
P.754 E1 alarm output voltage
06-11
P.160 Stall level when restart
06-59
P.755
E1 alarm the temperature rising
accumulation rate
06-21
P.705 Low voltage level
06-60
P.756 E1 alarm PN voltage
06-22
P.706 Regenerative brake operation level
06-61
P.757 E1 alarm the time of inverter has run
06-23
P.707 Regenerative brake operation level
06-62
P.758 E1 alarm inverter operation status code
06-25
P.709 Capacitor lifetime detection level
06-63
P.759 E1 alarm(years/months)
06-26
P.710 Capacitor lifetime detection result
06-64
P.760 E1 alarm (days/hours)
06-27
P.292 Accumulative motor operation time(minutes)
06-65
P.761 E1 alarm (minutes/seconds)
06-28
P.293 Accumulative motor operation time (days)
06-70
P.766 E2 alarm output frequency
06-29
P.296 Accumulative motor power time (minutes)
06-71
P.767 E2 alarm output current
06-30
P.297 Accumulative motor power time (days)
06-72
P.768 E2 alarm output voltage
06-31
P.298 Output power (low 16 position)
06-73
P.769
E2 alarm the temperature rising
accumulation rate
06-32
P.299 Output power (high 16 position)
06-74
P.770 E2 alarm PN voltage
06-41
P.289 Alarm code display
06-75
P.771 E2 alarm the time of inverter has run
06-43
P.291 Alarm message display
06-76
P.772 E2 alarm inverter operation status code
06-44
P.740 E1
06-77
P.773 E2 alarm (years/months)
06-45
P.741 E2
06-78
P.774 E2 alarm (days/hours)
06-46
P.742 E3
06-79
P.775 E2 alarm (minutes/seconds)
06-47
P.743 E4
07-17
P.802 CANopen communication status
06-48
P.744 E5
07-18
P.803 CANopen control status
06-49
P.745 E6
09-13
P.124 Expansion card version
06-50
P.746 E7
10-52
P.265 Over excitation current level
06-51
P.747 E8
11-13
P.402 Speed limit
06-52
P.748 E9
11-14
P.403 Speed limit bias
06-53
P.749 E10
14-20
P.618 Current value of curling radius
06-54
P.750 E11
14-32
P.630 Actual line speed
When in password protection, parameters cannot be read. (00-03(P.77)=“3”)
Exception
Parameters below can still be read:
Group
No.
Name
Group
No.
Name
00-00
P.90
The inverter model
03-60
P.586
Monitor inverter and expanded Slot3
output terminal state
00-01
P.188 Firmware version
00-05
P.295 Password setup
03-61
P.587
Monitor expanded Slot2&3 digital input
terminal state
00-08
P.37
Speed display
00-16
P.79
Operation mode selection
03-62
P.588
Monitor expanded Slot2 digital output
terminal state
00-25
P.990 Parameter mode setting
00-26
P.125 Expansion card type
06-26
P.710 Capacitor lifetime detection result
01-00
P.1
Maximum frequency
06-41
P.289 Alarm code display
01-01
P.2
Minimum frequency
06-43
P.291 Alarm message display
03-59
P.585 Monitor inverter digital input terminal state
06-44
P.740 E1
06-45
P.741 E2
