Shihlin SA3 Series, User Manual

Page: 352 / 423

Appendix 1 Parameter table
APPENDIX 350
Parameter
Number
Group Name Setting Range Default Page
P.654 14-10
Taper compensation correction
value
0～10000mm 0mm 298
P.656 14-44 Linear speed setting source
0：Off
0 307
1：Obtain linear speed via analog value or pulse
input
2：Obtain linear speed via communication
P.657 14-45 Linear speed setting 0～6500.0m/min 0.0m/min 307
P.658 14-46
Closed-loop tension limit
standard
0：Use rated frequency of motor as standard of
limitation
0 307
1：Use system linear speed as standard of limitation
P.659 14-47
Closed-loop tension limit
deviation
0.0%~100.0% 0.0% 307
P.700 10-40 VF separated voltage source
0: Given by digital 10-41(P.701).
0 265
1: Given by analog or HDI pulse signal.
P.701 10-41 VF separated voltage digital 0～440.00V/0~220.00V
According
to voltage
265
P.702 10-42 VF separated voltage Acc time 0～1000.0s 0.0s 265
P.703
10-43
VF separated voltage Dec time 0～1000.0s 0.0s 265
P.704 10-44 VF separated stop selection
0: Frequency/voltage independently decreases to 0.
0 265
1: After the voltage decreases to 0, frequency
decreases.
P.705 06-21 Low voltage level
220V inverter : 155～220V 155V
193
440V inverter : 310～440V 310V
P.706 06-22
Regenerative brake operation
level
220V inverter : 205～400V 360V
193
440V inverter : 410～800V 720V
P.707 06-23 Voltage stall level
220V inverter : 205～400V 380V
193
440V inverter : 410～800V 760V
P.708 06-24 Capacitor lifetime detection
0: Off
0 195
1: When the power is OFF, start to detect the lifetime
of capacitor on main circuit.
P.709 06-25 Capacitor lifetime detection level 0～100.0% 100.0% 195
P.710 06-26
Capacitor lifetime detection
result 0: Normal. Read
only
195
1: Electrolytic capacitor abnormal.
P.711 08-24 PID target signal filter time 0～650.00s 0.00s 231
P.712 08-25 PID feedback signal filter time 0～60.00s 0.00s 231
P.713 08-26 PID output signal filter time 0～60.00s 0.00s 231
P.714 08-27 PID deviation control limit 0～100.00% 0.00% 231
P.715 08-28 Integral separated property
0: Off
0 232
1: Integral separated
P.716 08-29 Integral separated point 0～100.00% 50.00% 232
P.717 08-30 PID differential limit 0～100.00% 0.10% 232