Shihlin SA3 Series, User Manual

Page: 336 / 423

Appendix 1 Parameter table
APPENDIX 334
Parameter
Number
Group Name Setting Range Default Page
P.247 10-29
Switch to commercial supply MC
switch-over interlock time
0.1～100.0s 1.0s 261
P.248 10-30
Switch to commercial supply
waiting time
0.1～100.0s 0.5s 261
P.249 10-31
From inverter to commercial power
supply switch-over frequency
0～60.00Hz
99999 261
99999: Off.
P.250 10-32
Automatic switch-over frequency
range
0~10.00Hz: After switching from inverter
operation to commercial power supply operation,
after inverter start command (STF/STR) is OFF,
switch to inverter operation.
99999 261
99999: After switching from inverter operation to
commercial power supply operation, after
inverter start command (STF/STR) is OFF,
switch to inverter operation, and slow down to
stop.
P.251 08-43 PID pressure range (Bar) setting 1.0~100.0 100.0 234
P.252 08-44 PID unit selection
0: %
0 235
1: bar
2: --
3: kgs
4: kg
5: psi
6: Pa
7: kPa
8: MPa
9: C
P.253 08-45
Disconnection detection time
feedback
0.0~600.0s 0.0s 235
P.254 08-46
Disconnection processing method
feedback
0: AEr alarm, inverter free stop
0 235 1: Slow down and stop, call AEr alarm
2: AEr alerts and continues running
P.255 01-36
S curve time at the beginning of
acceleration
0～25.00s/0～250.0s 0.20s 113
P.256 01-37
S curve time at the end of
acceleration 0～25.00s/0～250.0s
99999 113
99999: Off
P.257 01-38
S curve time at the beginning of
deceleration
0～25.00s/0～250.0s
99999 113
99999: Off
P.258 01-39
S curve time at the end of
deceleration 0～25.00s/0～250.0s
99999 113
99999: Off
P.259 00-09
Multi-function display unit
selection
X0: Speed display unit is 1
1 91
X1: Speed display unit is 0.1
0X: Power accumulation rate unit is 1
1X: Power accumulation rate unit is 0.1
2X:
Power accumulation rate unit is 0.01