Shihlin SA3 Series, User Manual

Page: 353 / 423

Appendix 1 Parameter table
APPENDIX 351
Parameter
Number
Group Name Setting Range Default Page
P.718 08-31 PID output positive deviation limit 0～100.00% 100.0% 233
P.719 08-32 PID output negative deviation limit 0～100.00% 100.0% 233
P.720 08-33
PID parameter switch-over operation
selection
0: No PID parameter switch-over.
0 233 1: PID parameter switch-over based on
deviation.
P.721 08-34
PID parameter switch-over deviation lower
limit
0～100.00% 20.00% 233
P.722 08-35
PID parameter switch-over deviation upper
limit
0～100.00% 80.00% 233
P.723 08-36 PID disconnection operation option 1
0: Select no need to run to the upper
limit when PID is disconnected
1 234
1: Select need to run to the upper limit
when PID is disconnected
P.724 08-50 PID target linear change time 0~650.00s 0.00s 235
P.726 08-39
PID counting when inverter stop action
selection 0: PID stop counting when inverter stop
0 234
1: PID keep counting when inverter stop
P.727 08-40 PID allowed reverse rotation action selection
0: PID does not allow reverse rotation
0 234
1: PID allows reverse rotation
P.728 08-41 PID in reverse direction integral limit 0～100.0% 0.0% 234
P.729 08-42 PID minimum output frequency 0～10.00Hz 0.00Hz 234
P.740 06-44 E1 Read only Read 198
P.741 06-45 E2 Read only Read 198
P.742 06-46 E3 Read only Read 198
P.743 06-47 E4 Read only Read 198
P.744 06-48 E5 Read only Read 198
P.745 06-49 E6 Read only Read 198
P.746 06-50 E7 Read only Read 198
P.747 06-51 E8 Read only Read 198
P.748 06-52 E9 Read only Read 198
P.749 06-53 E10 Read only Read 198
P.750 06-54 E11 Read only Read 198
P.751 06-55 E12 Read only Read 198
P.752 06-56 Output frequency during E1 alarm Read only Read 199
P.753 06-57 Output current during E1 alarm Read only Read 199
P.754 06-58 Output voltage during E1 alarm Read only Read 199
P.755 06-59
Temperature rising accumulation rate during
E1 alarm
Read only Read 199
P.756 06-60 PN voltage during E1 alarm Read only Read 199
P.757 06-61 Total inverter operation time during E1 alarm Read only Read 199
P.758 06-62
Inverter operation status code during E1
alarm
Read only Read 199