Shihlin SA3 Series, User Manual

Page: 118 / 423

Analog input and output parameter group 02
PARAMETER DESCRIPTION 116
Group
Parameter
Number
Name Setting Range Default Page
02-04 P.54
Terminal AM1 output
function
9: Output torque, use two times motor rated torque
as 100%.(Valid only when 00-21 (P.300) or 00-22
(P.370) is set to 3~6)
0 121
10: Output power, use two times motor rated power
as 100%.
11: High-speed pulse input, use 100KHz as 100%.
12: Motor speed, use 02-51 (P.55) as 100%
13：PLC analog output, for details please refer to
SA3 built-in PLC manual
02-05 P.537
Terminal AM2 output
function
6: Fixed output, voltage or current output level can
be set by 02-53(P.539).
0 121
0~5, 7~13: Same as 02-04(P.54).
02-06 P.185 Proportional linkage gain 0～100% 0% 122
02-07 P.240 Auxiliary frequency
0: Off
0 123
1: Output frequency = basic fre auxiliary
frequency (given by terminal 2-5)
2: Output frequency = basic fre auxiliary
frequency (given by terminal 4-5)
3: Output frequency = basic frequency - auxiliary
frequency (given by terminal 2-5)
4: Output frequency = basic frequency - auxiliary
frequency (given by 4-5 terminal)
5: Output frequency = proportional linkage signal
(given by terminal 2-5)
6: Output frequency = proportional linkage signal
(given by terminal 4-5)
7: Output frequency = proportional linkage signal
(given by terminal 3-5)
8: Output frequency = basic fre auxiliary
frequency (given by terminal 3-5)
9: Output frequency = basic frequency - auxiliary
frequency (given by terminal 3-5)
02-08 P.73
Terminal 2-5 signal range
selection
0: Signal sampling range from 0 ~5V.
1 124
1: Signal sampling range from 0 ~10V.
2: Signal sampling range from 0 ~ -5V.
3: Signal sampling range from 0 ~ -10V.
4: Signal sampling range from -5～+5V.
5: Signal sampling range from -10～+10V.
02-09 P.38
Terminal 2-5 maximum
running frequency 50Hz system: 1.00～650.00Hz 50.00Hz
124
60Hz system: 1.00～650.00Hz 60.00Hz
02-10 P.60 Terminal 2-5 filter time 0～2000ms 30ms 124
02-11 P.139
Terminal 2-5 voltage signal
bias rate
-100.0%~100.0% 0.0% 124
02-12 P.192
Terminal 2-5 minimum
input positive voltage
0～10.00V 0.00V 124
02-13 P.193
Terminal 2-5 maximum
input positive voltage
0～10.00V 10.00V 124
02-14 P.194
Percentage corresponds to
terminal 2-5 minimum
positive voltage
-100.0%～100.0%
0.0% 124
-400.0%～400.0%(02-00(P.500)= 2/14/15/16/17)