SCM Olimpic K 1000, Instruction Manual

Page: 456 / 583

INSTRUCTIONS FOR USE AND MAINTENANCE
RNK.14 EN
8
RNK/2.1.3- UPPER AND LOWER TRIMMING AND ROUNDING OF CON- RNK/2.1.3- UPPER AND LOWER TRIMMING AND ROUNDING OF CON-
NECTION CORNERS NECTION CORNERS
(The possibility to execute this kind of machining can be standard or optional; it depends from the type
of machine).
• The lower motor kit
(FIG.8-REF.1) is in the upper position, waiting for the panel.
• The panel, drawn by the drive track, leans on the front track feeler and on the vertical track feeler.
• The edging machining is executed on the head of the panel
(FIG.9-REF.A) .
• The panel pushes the lower motor kit downwards.
• The machining of a small stretch of the lower front side of the panel
(FIG.9-REF.B) is executed.
• The sensor placed on the cylinder (FIG.8-REF.2) controls the activation of the cylinder (FIG.8-
REF.3) .
• The cylinder (FIG.8-REF.3) keeps the lower motor kit in contact with the panel and the machining, the
trimming or radial machining of the lower exceeding edging (FIG.9-REF.C) is executed
• The lower motor kit (FIG.8-RIF.1) , pneumatically kept in contact with the panel, is caused to rotate.
• The edging machining is executed on the tail of the panel (FIG.9-REF.D) .
• The sensor placed on the cylinder (FIG.8-REF.3) determines the end of the machining.
• The lower motor kit (FIG.8-REF.1) returns to panel wait position.
• The upper motor kit (FIG.8-REF.4) is in the lower position, waiting for the panel.
• The panel, drawn by the drive track, leans on the front track feeler and on the vertical track feeler.
• The upper motor kit
(FIG.8-REF.4) executes the machining on the head of the panel (FIG.9-REF.E) ,
the machining of a small stretch of the upper front side of the panel (FIG.9-REF.F) , the trimming or
the radial machining of the upper exceeding edging (FIG.9-REF.G) , the machining on the tail of the
panel (FIG.9-REF.H) .