SCM Olimpic K 1000, Instruction Manual

Page: 68 / 583

4
4.4
INSTALLATION
EN
INSTRUCTION MANUAL
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
2
4.2- 4.2- POSITIONING THE MACHINE
MACHINE STATUS: positioned in the area designated for use, kept lifted by means of a lift truck.
OPERATORS: 1 maintenance mechanic; 1 operator in charge of moving the machine.
Proceed as follows:
• Screw the 4 screws supplied with the machine onto the legs (
FIG.2-REF.1).
• Lower the machine, positioning the support disks supplied with the machine ( FIG.2-REF.2) in corre-
spondence to the screws ( FIG.2-REF.1).
• Check that the machine is level using a level. Rest the level lengthwise and crossways inside the
cabin, as indicated in FIG.1.
• If necessary, adjust the screws ( FIG.2-REF.1).
4.3- 4.3- COMPLETING THE ASSEMBLY
MACHINE STATUS: positioned in the area designated for its use.
OPERATORS: 1 maintenance mechanic.
Proceed as follows:
• Perform a preventive machine inspections in order to detect and identify any damage incurred during
transportation and handling.
• Remove the electrical panel guards ( FIG.3-REF.1 ).
• Assemble the lower guards ( FIG.3-REF.2 ).
• Assemble the electrical panel guards ( FIG.3-REF.1 ).