SCM Olimpic K 1000, Instruction Manual

Page: 240 / 583

7
CONTROL
INSTRUCTIONS FOR USE AND MAINTENANCE
7.112 EN
7.6.8- MACHINING WITH THE BARCODE READER 7.6.8- MACHINING WITH THE BARCODE READER
Proceed as follows:
• Touch the corresponding key to access the MACHINING page.
• Read the label with the reader. (On the MACHINING page, the drawing of the label with the read data
is displayed - s. FIG.48 ).
48
If the read data on the label are correct:
• Touch the START key to start the machining (panel and edging thickness data are
loaded on the MACHINING page).
If the reading is incorrect.
• Touch the RESET key to annul the reading or perform a new reading.
If a label identical to the current machining is read, the machining continues without being interrupted
(current program).
If the program read on the label is not present on the SELECT PROGRAMS page, it will be necessary
to:
• Touch the RESET key to annul the reading.
• Create the program with the same name as the one on the label;
• Perform a new reading.