SCM Olimpic K 1000, Instruction Manual

Page: 502 / 583

INSTRUCTIONS FOR USE AND MAINTENANCE
RA1.8 EN
4 5
• Spring for vertical track feeling of the lower semi-unit (FIG.4-REF.1)
Keeps the lower vertical track feeler in contact with the panel to be machined.
• Spring for vertical track feeling of the upper semi-unit(FIG.4-REF.2)
Keeps the lower vertical track feeler in contact with the panel to be machined.
• Stop revolvers of the lower FIG.4-REF.3) and upper semi-unit (FIG.4-REF.4)
Defi ne the tool and track feeler machining position. By rotating the revolvers, a different tool and
horizontal track feeler position is defi ned. They allow the use of tool holder devices (adjusted
according to the different edge thicknesses). Every revolver position is numbered.
• Blower (FIG.4-REF.5)
Cleans the upper panel surface from eventual chips of a previous machining.
• Suction hoods (FIG.4-REF.6 and 7)
Channel the waste to the collection tray (FIG.5) .
• Chip breaker blade (FIG.6-REF.1 and 2)
Breaks the chips at the end of the panel.
• Pneumatic panel (FIG.7).
Contains the pneumatic components and pneumatic adjustment and signalling devices.
The upper semi-unit is connected to the presser in order to auto-adjust according to panel thickness
variations.