SCM Olimpic K 1000, Instruction Manual

Page: 472 / 583

INSTRUCTIONS FOR USE AND MAINTENANCE
RNK.30 EN
RNK/4- RNK/4- SETTINGS AND ADJUSTMENTS
RNK/4.1- RNK/4.1- EXCLUSION OF HALF-UNITS EXCLUSION OF HALF-UNITS
MACHINE STATUS: on, ready for operation.
OPERATORS: 1 assigned operator.
To exclude the upper half-unit or the lower half-unit or both from the work line, proceed as follows:
A) Version with standard control panel
• Use the corresponding selector switch / the corresponding selector
switches to select “excluded" (pos. 0) .
B) Version with control panel with graphic terminal
The exclusion of one of the half-unit or both half-units is automatically determined by selecting the work
program
(see chap.7) .
RNK/4.2- RNK/4.2- SELECTING THE OPERATIVE MODE SELECTING THE OPERATIVE MODE
MACHINE STATUS: on, ready for operation.
OPERATORS: 1 assigned operator.
To select the operative mode of the half-units (profi ling + trimming, profi ling, trimming), proceed as
follows:
(The possibility to execute the trimming of an edging exceeding from the upper or lower panel surface
can be standard or optional; it depends from the type of machine).
A) Version with standard control panel
• Use the corresponding selector switch / the corresponding selector
switches to select "profi ling + trimming” (pos. 1) , “profi ling ” (pos. 0) ,
“trimming” (pos. 2) .
B) Version with control panel with graphic terminal
The selection of the operative mode for one of the half-units or both half-units is automatically
determined by selecting the work program
(see chap.7) .