SCM Olimpic K 1000, Instruction Manual

Page: 454 / 583

INSTRUCTIONS FOR USE AND MAINTENANCE
RNK.12 EN
RNK/2.1.2- RNK/2.1.2- TRIMMING EDGINGS EXCEEDING FROM UPPER AND TRIMMING EDGINGS EXCEEDING FROM UPPER AND
LOWER PANEL SURFACE LOWER PANEL SURFACE
(The possibility to execute this kind of machining can be standard or optional; it depends from the type
of machine).
• The lower motor kit
(FIG.6-REF.1) is in panel wait position (with vertical track feeler exceeding the
lower surface of the panel of 0.5 mm).
• The panel, drawn by the drive track, leans on the front track feeler and on the vertical track feeler.
• The cylinder
(FIG.6-REF.2) keeps the lower motor kit in contact with the panel and the machining, the
trimming or radial machining of the lower exceeding edging is executed (FIG.7-REF.A) .
The upper motor kit (FIG.6-REF.3) operates in an analogue way on the upper exceeding edging (FIG.7-
REF.B) .