SCM Olimpic K 1000, Instruction Manual

Page: 298 / 583

INSTRUCTIONS FOR USE AND MAINTENANCE
RTE.10 EN
RTE/2.3- TECHNICAL DATA RTE/2.3- TECHNICAL DATA
Panel
Materials ( 1 ) chipboard, MDF and honeycomb wood
Thickness 10 ÷ 60 mm
(
1
) THE MACHINING OF PANELS CONTAINING METAL IS ABSOLUTELY FORBIDDEN.
Motors specifi cations (depending on the
machine model and on the optionals)
1,8 kW - 2,2 kW - 4,0 kW - 9000 rev./ min
Track feeler (if any) Front type with pads
Tools (
2
)
standard
diameter ø 100 mm
hole ø 30 mm
height 65 mm
nr. of teeth 3
tip material HM
optional
diameter ø 100 mm
hole ø 30 mm
height 48 or 63 mm
nr. of teeth 2 or 3
tip material diamond
(
2
) OBSERVE THE INDICATIONS GIVEN IN PAR. 5.2.
Removal depth 0 ÷ 3 mm ( 3 )
Maximum removal section
Motors 1,8 kW 58 mm²
Motors 2,2 kW 60 mm²
Motors 4,0 kW 90 mm²
( 3 ) WARNING: THE MAX REMOVAL SECTION MUST NOT BE EXCEEDED.
Aspirated air consumption 20 m 3 /min
Pneumatic imput pressure 6 bar
Compressed air consumption 0,85 Nl/min
SOME VALUES ARE IN FUNCTION OF THE MODEL AND SET-UP OF THE MACHINE. REFER
TO PAR. 2.8. (TECHNICAL DATA).