SCM Olimpic K 1000, Instruction Manual

Page: 278 / 583

AAR.12
INSTRUCTIONS FOR USE AND MAINTENANCE
EN
9 8
AAR/4- AAR/4- SETTINGS AND ADJUSTMENTS
MACHINE STATUS: off, with the main switch in the “0” position and locked and compressed air cut-off
valve closed and locked
OPERATORS: 1 assigned operator.
AAR/4.1- EXCLUSION OF UNIT AAR/4.1- EXCLUSION OF UNIT
Select “unit excluded” from control panel (s. chap.6) or from control ( s. chap.7 ) (depending on the type
of machine and options).
The tap
(FIG.8-REF.1 or FIG.9-REF.1) allows the cutting off of the supply to the lower nozzle only.
AAR/4.2- AAR/4.2- ADJUSTING THE HORIZONTAL POSITION OF THE ADJUSTING THE HORIZONTAL POSITION OF THE
NOZZLES NOZZLES (FOR A FEW TYPES OF MACHINES ONLY) (FOR A FEW TYPES OF MACHINES ONLY)
The nozzle axis should coincide with the panel protrusion from the track (s. FIG.10) .
Upon the variation of the panel protrusion from the track, it is necessary to change the horizontal
position of the nozzles (possibility envisaged for a few types of machines only).
Proceed as follows:
Upper nozzle:
• Loosen the release lever
(FIG.11-REF.1) .
• Horizontally move the bracket (FIG.11-REF.2) . Refer to the graduated plate (FIG.11-REF.3) .
• Block the release lever (FIG.11-REF.1) .
Lower nozzle: proceed as above.