SCM Olimpic K 1000, Instruction Manual

Page: 484 / 583

INSTRUCTIONS FOR USE AND MAINTENANCE
RNK.42 EN
RNK/6.2- RNK/6.2- ADJUSTING THE POSITION OF FRONT TRACK FEELERS ADJUSTING THE POSITION OF FRONT TRACK FEELERS
THIS ADJUSTMENT IS CARRIED OUT IN THE MACHINE TESTING PHASE AND GENERALLY THIS ADJUSTMENT IS CARRIED OUT IN THE MACHINE TESTING PHASE AND GENERALLY
DOES NOT HAVE TO BE REPEATED.
DOES NOT HAVE TO BE REPEATED.
In the case of an exceeding or defecting removal of the thin or thick edging in horizontal direction,
proceed as follows:
Lower motor kit:
• Loosen the nuts
(FIG.22-REF.1) .
• Use the screw (FIG.22-REF.2) .
• Block the nuts (FIG.22-REF.1) .
Upper motor kit: proceed as for the lower motor kit.
AFTER EVERY ADJUSTMENT OF THE FRONT TRACK FEELERS POSITION: AFTER EVERY ADJUSTMENT OF THE FRONT TRACK FEELERS POSITION:
• ADJUST THE HORIZONTAL TRACK FEELING VALUE (SEE PAR. RNK/6.4).
• ADJUST THE HORIZONTAL TRACK FEELING VALUE (SEE PAR. RNK/6.4).
• CONSIDER WHETHER IT IS NECESSARY OR NOT TO ADJUST THE VERTICAL TRACK
• CONSIDER WHETHER IT IS NECESSARY OR NOT TO ADJUST THE VERTICAL TRACK
FEELING VALUE (SEE PAR. RNK/6.5). FEELING VALUE (SEE PAR. RNK/6.5).