SCM Olimpic K 1000, Instruction Manual

Page: 367 / 583

- NTK / 9 -
2 Adjusting motors for straight or angled
cutting
Manually:
•
Loosen the handle (10).
•
Incline the motors manually (11).
•
Tighten the handle (10) again.
The handle must be tightened so that it does not
interfere with the panel as it passes.
Automatically:
•
Turn the luminous selector switch.
0 =
2 =
Straight cut: The reference stop is
adjustable, turn screw (12).
Angled cut
Before tilting the motors in the automatic mode
make sure that the feed belt is stopped.
3 Adjustment for removal of excess edging
material
•
Loosen screw (13).
•
Turn the hexagonal stud (14).
•
Tighten screw again (13).
2 Regulación motores para corte recto o
inclinado
Manualmente:
•
Aflojar la manecilla (10).
•
Inclinar manualmente los motores (11).
•
Volver a bloquear la manecilla (10).
La manecilla debe estar bloqueada para que no
choque al pasar el panel.
Automáticamente:
•
Regular mediante el selector luminoso inestable.
0 =
2 =
Corte recto: ajustar con la tuerca
(12) para regular el tope.
Corte inclinado
Antes de inclinar automáticamente los motores
controlar que la oruga de remolque esté parada.
3 Regulación desbaste canto sobrante
•
Destornillar el tornillo (13).
•
Girar el perno hexagonal (14).
•
Volver a bloquear el tornillo(13).