SCM Olimpic K 1000, Instruction Manual

Page: 458 / 583

INSTRUCTIONS FOR USE AND MAINTENANCE
RNK.16 EN
10
RNK/2 RNK/2. .2- 2- TECHNICAL DATA TECHNICAL DATA
Panel ( 1 )
Min. width 100 mm
Min. length 140 mm
Thickness
straight (FIG.10-REF.A) 8 ÷ 60 mm
shaped (FIG.10-REF.B) 8 ÷ (50 mm) (
2
)
((
1 1
) THE PANELS AND THE CORRESPONDING COVERINGS MUST BE SUFFICIENTLY ) THE PANELS AND THE CORRESPONDING COVERINGS MUST BE SUFFICIENTLY
RESISTANT. IF THE PANELS AND THE CORRESPONDING COVERINGS GET DEFORMED BY RESISTANT. IF THE PANELS AND THE CORRESPONDING COVERINGS GET DEFORMED BY
TOUCHING THE TRACK FEELERS, THE MACHINING TURNS OUT TO BE COMPROMISED.
TOUCHING THE TRACK FEELERS, THE MACHINING TURNS OUT TO BE COMPROMISED.
(( 2 2 ) THE MAXIMUM THICKNESS OF SHAPED PANELS DEPENDS ON THE MACHINING TO BE ) THE MAXIMUM THICKNESS OF SHAPED PANELS DEPENDS ON THE MACHINING TO BE
EXECUTED (SEE FIG.11) AND ON THE FEED SPEED OF THE TRACK. EXECUTED (SEE FIG.11) AND ON THE FEED SPEED OF THE TRACK.
FIG.11
MACHININGS
Upper half-unit Lower half-unit
1 Profi ling / Profi ling + Trimming Profi ling / Profi ling + Trimming
2 Profi ling / Profi ling + Trimming Trimming/ Excluded
3 Profi ling / Profi ling + Trimming Trimming/ Excluded
4 Profi ling / Profi ling + Trimming Profi ling / Profi ling + Trimming
5 Profi ling / Profi ling + Trimming Profi ling / Profi ling + Trimming