Chapter 13: Running Your Library
Using the Library Access Feature
Quantum Scalar i6000 User’s Guide
495
4
Click the
Prepare
button and wait until the screen notifies you that
it is safe to open the module door.
The library finishes the current command and begins to report
“Becoming Ready” status to hosts. Once this happens, a dialog box
appears on the screen stating that it is safe to open the door, and
the 10-minute timer starts counting down.
5
Click
OK
to close the dialog box. (The dialog box will close on its
own after 15 seconds.)
6
Open a module access door and perform your activity. Try to finish
within 6 to 7 minutes.
7
When finished, close the module door and press the
Robotics
Enabled
button.
8
Wait for the library to come ready
(Library Status
on the screen
says “Ready” and the
Robotics Enabled
button comes on solid).
Summary of Contents for Scalar i6000
