![background image](http://html1.mh-extra.com/html/quantum/scalar-i6000/scalar-i6000_user-manual_3997321356.webp)
Chapter 9: Extended Data Lifecycle Management
Configuring EDLM
338
Quantum Scalar i6000 User’s Guide
Perform scans based on
time interval since last
scan.
Scans a tape if the time interval since the last scan was performed has
been exceeded. In the text box, type a time interval (in days) after which
a scan will be performed.
Note:
When deciding on the interval, consider the number of tapes to
be scanned in the entire library, as well as the type of scan to be
performed. Full scans can take more than 2 hours on full tapes.
Over-scheduling can cause delays or tapes not to be scanned as
intended.
This policy is disabled by default. The default interval is 180 days. To
change the interval, type a new value in the interval text box.
Perform scans based on
External Application
suspect count.
A suspect count is a means by which an external application determines
when to stop writing data to tape.
If you select this policy, a tape will be queued for EDLM testing when its
suspect count threshold is reached. If the EDLM test indicates the tape is
good, you can reset the suspect count on the external application and
continue to use the tape. For more information on suspect counts and
resetting suspect counts, refer to your external application’s
documentation.
This policy is disabled by default. You can only select this policy if
Enable
External Application support
is also selected (see
on page 337), and if the external application
supports suspect counts.
Perform scans
immediately when media
is imported into the
library.
Scans a tape cartridge as soon as it is imported into the partition.
Media Scan Candidate
Policy
Description
Summary of Contents for Scalar i6000
