![background image](http://html1.mh-extra.com/html/quantum/scalar-i6000/scalar-i6000_user-manual_3997321204.webp)
Chapter 3: Configuring Your Library
Specifying the Date and Time
186
Quantum Scalar i6000 User’s Guide
4
In the NTP section
• If you choose to enable NTP, click
Enable
.
The
Date and Time
sections of the dialog box are grayed out.
• Type valid IP addresses for the
Primary Server
and optionally
the
Secondary Server
and
Tertiary Server
.
• If the DNS Server has not been configured in the LMC, type
valid numeric IP addresses that are accessible from the
library (example 111.11.11.111). Go to step 7.
• If the DNS Server has been configured through the LMC
(
Setup > Network Configuration > DNS Configuration
),
type the valid alpha/numeric IP Addresses that are accessible
from the library. Go to step 7.
• If NTP is enabled and you no longer want to use this setting,
click
Disable
.
Summary of Contents for Scalar i6000
