![background image](http://html1.mh-extra.com/html/quantum/scalar-i6000/scalar-i6000_user-manual_3997321193.webp)
Chapter 3: Configuring Your Library
Managing Connectivity
Quantum Scalar i6000 User’s Guide
175
You can configure all settings for an I/O blade connection. The
figure above shows an FC port configured for target mode and a
loop preferred connection.
a
In the
Loop ID
area of the
Fibre Channel Parameters
dialog
box, repeatedly selecting
Soft
acts as a toggle, checking and
clearing the box. If the box is not checked, you can click a hard
loop ID (within the range from 0 to 125) from the drop-down
list. Some operating systems require hard ID settings. Consult
your service representative before making changes to this
setting.
b
Select
Auto
to automatically set the interface speed. To
configure the speed manually, uncheck the
Auto
check box and
use a setting from the drop-down list.
c
FC
Frame Size
is specified by each receiving node and need not
match any other node. The frame size is typically set to 2048.
(You can use another frame size if it is required by a particular
software application.)
Summary of Contents for Scalar i6000
