background image

Quantum Scalar i6000 User’s Guide

327

Chapter 9

Extended Data Lifecycle 

Management

Extended Data Lifecycle Management (EDLM) provides data protection 

and integrity checking by scanning your tape cartridges, providing 

results, and allowing StorNext Storage Manager to migrate data off of 

bad or suspect tapes. EDLM allows you to run manual scans on any tape 

cartridge in the library at any time, and performs automatic scans 

according to schedules and policies that you set up.
To use EDLM, you set up an EDLM library managed partition into which 

tapes are moved for scanning. Scanning takes place using “EDLM 

scanning drives.” You can use EDLM for manual scans at any time and 

also set up automatic scanning policies.

EDLM is typically used to check the health of data on cartridges in long-

term retention (archive or disaster recovery) that are no longer used in 

normal operations. (Conversely, health information for active cartridges 

is presented in the Media Integrity and Media Usage reports, which are 

part of the Advanced Reporting feature.).
This section covers the following topics:

About EDLM

 on page 328

Configuring EDLM

 on page 330

Step 1: Creating the EDLM Library Managed Partition

 on 

page 330

Step 2: Configuring Access to StorNext

 on page 332 (optional)

Step 3: Configuring EDLM Policies on Partitions

 on page 332

Summary of Contents for Scalar i6000



































































































































































































































































































































































































































































































































































































































































































































































Reviews: