Quantum Scalar i6000 User Manual Download Page 631

Page: 631 / 738

Chapter 15: Maintaining Your Library

Maintenance Actions

Quantum Scalar i6000 User’s Guide

613

•

All Drives by Coordinate

: Presents the sum total of all

attributes for all drives in the library.

•

All Drives by Physical SN

: Presents the sum total of all

attributes for all drives according to the physical drive SN.

•

All Partitions

: Presents a comparison of all drives grouped

by partition in the physical library.

•

Selected Drive by Coordinate

: Graph is based on an

individual drive according to the library system coordinates.

For example, 1,1,1,1,1,1.

•

Selected Drive by Physical SN

: Graph is based on an

individual physical drive SN.

•

Selected Partition

: Graph is based on an individual

partition in the physical library.

•

All Media

: Presents all media for all drives.

•

Select Media

: Presents selected media by media ID.

• Attribute

• Data Written/Read
• Mount Count
• Media Motion Time
• Total Read and Write

• Type

•

Rollup

: A device x-axis for the display of attributes by drive

or library.

•

Trend

: A time scale x-axis for the display of the trend of the

particular attribute.

• Chart: Choose from the following charts to visually display your

data:

• Bar
• Bar 3D
• Line
• Stacked Area
• Stacked Bar

Summary of Contents for Scalar i6000



































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Scalar i6000

Reviews:

Related manuals for Scalar i6000

Brands by name

Popular brands

Quantum Scalar i6000, User Manual

Search results

Summary of Contents for Scalar i6000

Reviews:

Related manuals for Scalar i6000

Brands by name

Popular brands