Quantum Scalar i6000, User Manual

Page: 453 / 738

Chapter 13: Running Your Library
Logging On and Off
Quantum Scalar i6000 User’s Guide 435
Note: While passwords are case-sensitive, user names are not
case-sensitive. Select the Shift key to display uppercase
letters and special characters. This enables you to type one
uppercase letter or special character before the Scalar
i6000 Logon dialog box returns to displaying lowercase
characters. To type more than one uppercase character or
special character, select the Caps key. The Caps key toggles
between displaying uppercase and lowercase characters.
Note: Only one administrator at any given time can be logged on
to the library.
Note: If you want to log on using the default administrator
account (admin), and you do not remember the password,
contact Quantum Support to reset the password.
Note: If the date and time have reset to January 1, 1970 or if the
year is set to a date earlier than 1970, a warning dialog will
display on login.
3 Position the cursor in the text box below the Name text box by
tapping it, and then type the password for the user or administrator
account.
Note: If you are logging on to the library for the first time using
the default administrator account (admin), type
password
. After you log on, the library prompts you to
change the default admin password. You must enter and
confirm a new password. Passwords that are most secure
include a combination of letters, numbers, and non-
alphanumeric characters. Passwords must be eight or more
characters in length. The word “password” is not available
for use.
4 After you type a user name and password, select OK .