![background image](http://html1.mh-extra.com/html/quantum/scalar-i6000/scalar-i6000_user-manual_3997321516.webp)
Chapter 14: Using the Command Line Interface
Logging on to the CLI
498
Quantum Scalar i6000 User’s Guide
Logging on to the CLI
1
Enable CLI on the library:
a
From the LMC, select
Setup > Security
.
b
Under
CLI
, select the
Enable
radio button.
c
Under
SSH
, select the
Enable
radio button.
Note:
Both the
CLI
and
SSH
must be enabled in order to use
the command line interface.
d
Click
OK
.
For more information on library security settings, see
2
Use SSH to access the CLI.
Note:
When using Putty or Tera Term on Windows, enter the user
name and password in boxes.
When using Linux, log in as:
ssh admin@library_<ip>
(where
<ip>
is the IP address of the library).
3
When prompted for the user name, type:
admin
.
Note:
The only user name supported on the CLI is
admin
.
4
When prompted for the password, type the admin password
configured on the library. The main CLI screen appears.
Welcome to the XXX Library Command Line Interface.
Type 'help' at the prompt for context-sensitive help.
/>
Summary of Contents for Scalar i6000
