Quantum Scalar i6000 User Manual Download Page 707

Page: 707 / 738

Quantum Scalar i6000 User’s Guide

689

Chapter 16

Working With Cartridges

and Barcodes

The Library Management Console (LMC) simplifies cartridge loading and

unloading, importing and exporting, and moving and inventory

operations. The maximum library can be configured to accommodate

from 100 LTO cartridges to 7,146 LTO cartridges (for a single-robot

library) or 7,224 LTO cartridges (for a dual-robot library). For libraries

containing high-density expansion modules, the maximum capacities

are 12,006 LTO cartridges (for a single-robot library) or 11,760 LTO

cartridges (for dual-robot libraries) for the following drive types:

Note:

A library with Gen 2 hardware does not support DLT tape drives

and media.

• SCSI  or  Fibre  LTO-1
• SCSI  or  Fibre  LTO-2
• Fibre  LTO-3
• Fibre  LTO-4
• Fibre  LTO-5
• Fibre  LTO-6
• Fibre LTO-7 (IBM only)

Every partition in the library must contain at least one cleaning

cartridge.
This chapter consists of the following sections:

Summary of Contents for Scalar i6000



































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Scalar i6000

Reviews:

Related manuals for Scalar i6000

Brands by name

Popular brands

Quantum Scalar i6000, User Manual

Search results

Summary of Contents for Scalar i6000

Reviews:

Related manuals for Scalar i6000

Brands by name

Popular brands