![background image](http://html.mh-extra.com/html/sealey/ap6601/ap6601_instructions_1226868001.webp)
INSTRUCTIONS FOR:
ADD-ON CHEST/TOPCHEST/ROLLCAB -
HEAVY DUTY - RED
MODEL No's
:
AP6601/6610/6612
Thank you for purchasing a Sealey product. Manufactured to a high standard these products will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
1. SAFETY INSTRUCTIONS
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCTS CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH THEY ARE INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
2. INTRODUCTION
3. SPECIFICATION
1.1. GENERAL SAFETY
WARNING!
Ensure Health & Safety, local authority, and
general workshop practice regulations are adhered to when
using these units.
Locate the units in a suitable work area.
Keep the work area clean, uncluttered and ensure there is
adequate lighting.
WARNING!
Use the Rollcab on level and solid ground,
preferably concrete.
Keep the units clean and tidy in accordance with good
workshop practice.
Keep children and unauthorised persons away from the work
area.
DO NOT
use these units for any purpose other than that
for which they are designed.
DO NOT
use the units outdoors.
DO NOT
place the units in a damp or wet location or an
area where there is condensation.
DO NOT
clean the units with any solvents which may
damage the surfaces or the protective coating.
DO NOT
move the units with the drawers out. To avoid
tipping, open one drawer at a time and close and secure all
drawers whilst moving the rollcab.
DO NOT
step on the drawers.
DO NOT
overload the drawers, weight limit per drawer is
36kg.
•
All heavy gauged steel construction and manufactured with
steel inner walls for extra strength and durability.
•
Heavy-duty 45mm ball bearing drawer runners provide superior
performance and carry heavier loads.
•
Full height rear locking mechanism, locks full-length drawers in
multiple locations.
•
Added security provided by tumbler locks, supplied with two
folding keys.
•
Rust and solvent resistant powder coat paint finish.
•
The rollcab is fitted with six Ø125mm plastic wheels, two fixed
and four castors, two of which are lockable.
•
Topchest features heavy-duty side handles.
•
Rollcab features a high polished chrome handle for comfort
and control when manoeuvring.
•
Rollcab supplied with a 10mm thick top mat to protect top
surface from scratching.
•
Drawers feature stylish aluminium drawer pulls and non-slip
liners.
Model No.
AP6612
AP6610
AP6601
Overall Size W x D x H (mm):
1684 x 466 x 985
1656 x 435 x 495
1664 x 440 x 170
Full Width Large Drawer (mm):
1570 x 405 x 105 (x1)
1200 x 405 x 130 (x1)
1570 x 405 x 105 (x1)
Small Drawer (mm):
1200 x 405 x 50 (x5)
1200 x 405 x 50 (x4)
-
Large Drawer (mm):
1200 x 405 x 130 (x1)
-
-
Small ½ Drawer (mm):
325 x 405 x 50
(x4)
325 x 405 x 50
(x4)
-
X-Large ½ Drawer (mm):
325 x 405 x 235 (x1)
325 x 405 x 130 (x1)
-
Max. weight per wheel set:
900kg
Original Language Version
AP6601, 6610, 6612 Issue: 1 - 30/11/12
© Jack Sealey Limited
AP6612
AP6610
AP6601