PerkinElmer Clarus SQ 8 MS Series, Hardware Manual

Page: 88 / 184

Clarus SQ 8 MS Hardware Guide
86
Returning the Source
CAUTION
ATTENTION
To prevent contamination of the mass spectrometer, always wear clean,
lint-free, powder-free nitrile, nylon, or PVC gloves before touching,
removing or replacing parts. Hold the source by its handle only. Never
touch these parts with ungloved (bare) fingers, as this will introduce
contaminants into the system.
Pour éviter toute contamination du spectromètre de masse, porter
toujours des gants de nitrile, de nylon ou de PVC sans pelu, sans
peluches, sans poudre avant de toucher, d'enlever ou de remplacer les
pièces. Tenez la source uniquement par son manche. Ne touchez jamais
ces pièces avec des doigts non agglomérés, car cela introduira des
contaminants dans le système.
1.
Carefully hold the source by its edges.
2.
Align the red dot on the source handle with the red dot on the instrument panel
and rotate the source clockwise until it locks into position.
Figure 13 Lining up the red dots.
3.
Push the inner transfer line tube back.
Red dots
aligned