PerkinElmer Clarus SQ 8 MS Series, Hardware Manual

Page: 25 / 184

Warnings and Safety Information
AVERTISSEMENT
Pour une protection contre les risques d'incendie, remplacer
uniquement un fusible par un fusible du même type et de même
calibre. Par exemple, un fusible de 10 ampères pour 120 V et
un fusible de 5 ampères pour 240 V.
Ensure that the power cord is correctly wired and that the ground leads of all electrical units
(for example, recorders, integrators) are connected together via the circuit ground to earth.
Use only three-prong outlets with common earth ground connections. For details, refer to
the descriptions in the
Clarus GC Installation Guide (P/N 09936590 or 09936779) .
•
Servicing of electrical components within the mass spectrometer should be
performed
only by a PerkinElmer Service Representative.
•
Servicing of the incoming AC power line components in your laboratory
should be performed
only by a licensed electrician.
WARNING
Electrical shock hazard. To prevent electrical shock, disconnect
the power cord from the AC outlet before servicing.
AVERTISSEMENT
Risque d'électrocution. Pour éviter tout choc électrique,
débranchez le cordon d'alimentation de la prise secteur
avant de procéder à l'entretien.
Under no circumstances should circuit boards be removed or inserted unless the
instrument is disconnected from line power.