PerkinElmer Clarus SQ 8 MS Series, Hardware Manual

Page: 61 / 184

About the Clarus GC/MS System
59
CAUTION
ATTENTION
The AC line cord for the rotary vane pump must be plugged into the
designated receptacle on the back of the Clarus MS. The pump is
controlled by the TurboMass software.
Connecting the vacuum hose to the exhaust connection of the rotary
pump will severely contaminate the Clarus MS.
Le cordon de ligne AC pour la pompe rotative doit être branché dans la
prise désignée à l'arrière du Clarus MS. La pompe est contrôlée par le
logiciel TurboMass.
La connexion du tuyau d'aspiration au raccord d'échappement de la
pompe rotative contaminera sévèrement le MS de Clarus.
Instrument Power Rotary Pump Outlet
120 VAC 120 VAC ~ 50/60 Hz MAX POWER 828 VA
230 VAC 230 VAC ~ 50/60 Hz MAX POWER 690 VA
Vacuum Pump Options
The Clarus SQ 8 MS offers two different vacuum pump capacities.
Turbomolecular pumps are high-speed turbines which transport the sample and
carrier gas molecules away from the mass spectrometer.
•
Clarus SQ 8 S - The 75 L/sec turbomolecular pump supports Electron
Ionization operation (EI) and has optional water cooling.
•
Clarus SQ 8 T – All of the functions and options of the SQ 8 S with a 255
L/sec turbomolecular pump for higher column flow rates, pump-down time
under three minutes, and lower detection limits
•
Clarus SQ 8 C - All of the functions and options of the SQ 8 T with positive
and negative Chemical Ionization (CI) operation.