616
Troubleshooting
Section 11-2
11-2-6 Other Errors
Communications Errors
■
CPU Unit Indicators
POWER
Lit
RUN
Lit
ERR/ALM
---
INH
---
BKUP
Not lit
PRPHL
---
Seven-segment
display
Probable cause and possible remedy
None
An error has occurred in the communications between the periph-
eral port and connected device. Confirm that the peripheral port
settings in the PLC Setup are correct.
An error has occurred in the communications between the RS-
232C port and connected device. Confirm that the RS-232C port
settings in the PLC Setup are correct. Check the cable wiring. If a
host computer is connected, check the serial port settings and
program in the host computer.
An error will be occurred if the cycle time is too long. Modify the
CX-Programmer's response monitoring time longer according to
the following method.
Start the CX-Programmer. Select
Change Model
from the
PLC
Menu. The
Change PLC
Dialog Box will be displayed. Click the
Settings
Button on the right side of
Network Type
. The
Network
Settings [USB]
Dialog Box will be displayed. Click the
Network
Tab and increase the value in
Response Timeout(s)
.
POWER
RUN
INH
PRPHL
BKUP
ERR/ALM
Summary of Contents for Sysmac CP1H
