Omron Sysmac CP1H, Operation Manual

Page: 618 / 810

584
Trouble Shooting Section 9-11
03C0 FLASH FINS/TCP setting error 01 to 02:
Connection
No.
01:
Automatically
allocated
FINS node
address
duplication
02:
Destination
IP address
error
03:
Destination
port number
error
Set the FINS/TCP
settings correctly. ---
03C2 --- FINS/TCP packet
discarded 01 to 02:
Connection
No. 03:
Reception
error
04:
Transmission
error
Resend the command. ---
There is too much load
(traffic) on the Ethernet
Option Board. Correct the
system so that traffic is not
concentrated. ---
03C3 --- FINS/UDP Packet
discarded 00 01 to FE
Node address The automatic generation
(static) method was used
as the IP address conver-
sion method, so remote IP
address information in
internal memory could not
be changed. ---
03C8 --- Socket Error Arbitrary Resend the packet or the
destination node is not in
the network. ---
03D0 FLASH System setup sum value
error Reset the value of system
setup area, Restart CPU
Unit. Saved
0601 LIT Option Board error Arbitrary Restart the CPU Unit. If
the problem persists,
replace the Ethernet
Option Board. Saved
0602 LIT Option Board memory error 01: Read
error
02: Write
error
06:Error log Restart the CPU Unit. If
the problem persists,
replace the Ethernet
Option Board. Saved
(except
error log)
Error
code
ERR
LED
Meaning
Detailed error code
Correction EEPROM
1st byte 2nd byte