551
Specifications
Section 9-4
9-4
Specifications
Note
1. Two CP1W-CIF41(unit version 2.0) can be mounted in the CP1L/CP1H system.
2. One CP1W-CIF41(unit version 2.0) and one CP1W-CIF41(unit version 1.0) can be mounted in
the CP1L/CP1H system.
3. Only one CP1W-CIF41(unit version 1.0) can be mounted in the CP1L/CP1H system. If two
CP1W-CIF41 are mounted, the CP1W-CIF41 mounted on option board slot 1 will be abnormal
and ERR indicator will be ON, the CP1W-CIF41 on option board slot 2 will work normally.
4. CP1W-CIF41 only supports 32 bytes PING command. If PING command's length is larger than
32 bytes, there is no response.
Item
Specifications
Model number
CP1W-CIF41
Type 100/10Base-TX
(Auto-MDIX)
Applicable PLCs
CP1L and CP1H PLCs
Unit classification
CP1 option port unit
Mounting location
CP1L and CP1H micro PLC option port
Max. number of Units that can be
mounted
2 sets (See note.)
Size of Buffers
8K bytes
Transfer
Media access method
CSMA/CD
Modulation method
Baseband
Transmission paths
Star form
Baud rate
100 Mbit/s (100Base-TX)
10 Mbit/s (10Base-T)
• Half/full auto-negotiation for each port
• Link speed auto-sensing for each port
Transmission media
• Unshielded twisted-pair (UDP) cable
Categories: 5, 5e
• Shielded twisted-pair (STP) cable
Categories: 100
Ω
at 5, 5e
• Unshielded twisted-pair (UDP) cable
Categories: 3, 4, 5, 5e
• Shielded twisted-pair (STP) cable
Categories: 100
Ω
at 3, 4, 5, 5e
Transmission Distance
100 m (distance between hub and node)
Current consumption (Unit)
130 mA max. at 5 V DC
Vibration resistance
Conforms to JIS 0040.
10 to 57Hz: 0.075-mm amplitude, 57 to 150 Hz: acceleration 9.8 m/s
2
in X, Y, and Z
directions for 80 minutes each (sweep time: 8 minutes×10 sweeps = 80 minutes)
Shock resistance
Conforms to JIS 0041.
147m/s
2
, 3 times each in X, Y, and Z directions
Ambient operating temperature
0 to 55°C
Ambient humidity
10% to 90% (with no condensation)
Atmosphere
Must be free of corrosive gas.
Ambient storage temperature
-20 to 75°C
Weight
23 g max.
Dimensions
36.4×36.4×28.2 mm (W×H×D)
Summary of Contents for Sysmac CP1H
