background image

GETTING STARTED GUIDE

NI 5783

Four Channel Transceiver Adapter Module

Note

 

Before you begin, complete the software and hardware installation

instructions in the getting started guide for your FlexRIO FPGA module or
Controller for FlexRIO.

The NI 5783 is a FlexRIO adapter module designed to work in conjunction with FlexRIO
FPGA modules and Controllers for FlexRIO.

The NI 5783 is available in two variants. The NI 5783-01 variant is a 40 MHz Elliptic Filter
(Frequency Domain). The NI 5783-02 variant is a 40 MHz Butterworth Filter (Time Domain).
Unless otherwise specified, all descriptions in this document refer to both variants.

The NI 5783 features 4 analog input channels with 16-bit resolution and sample rates up to
100 MS/s, and 4 analog output channels with 16-bit resolution and sample rates up to
100 MS/s or 200 MS/s.

Note

 

The NI 5783 is compatible only with NI PXIe-797xR and NI-793xR devices.

This document explains how to install and configure the NI 5783.

Contents

Electromagnetic Compatibility Guidelines...............................................................................2
FlexRIO Documentation........................................................................................................... 2
Verifying the System Requirements..........................................................................................4
Unpacking................................................................................................................................. 4
Preparing the Environment....................................................................................................... 4
Installing the NI 5783............................................................................................................... 5
Confirming that Measurement & Automation Explorer (MAX) Recognizes the Device........ 5
Recommended Cables...............................................................................................................6
Accessories................................................................................................................................6
Front Panel and Connector Pinouts...........................................................................................6

AUX I/O Connector.......................................................................................................... 8

Block Diagram.......................................................................................................................... 9
Logic Diagram.......................................................................................................................... 9
Component-Level Intellectual Property (CLIP)..................................................................... 10

NI 5783 CLIP..................................................................................................................10
NI 5783 400 MSPS AO CLIP......................................................................................... 11

Clocking.................................................................................................................................. 11

Summary of Contents for 5783















Reviews: