Omron Sysmac CP1H, Operation Manual

Page: 791 / 810

757
PLC Setup Appendix G
Origin Return Settings
Pulse Output 2 Settings
Base Settings
Name Default Settings When setting is read
by CPU Unit
Internal
address
Bits Settings
1 Speed 0 pps
(disabled) 1 pps At start of operation 289 and
288 00 to 15 0000 0001
hex
: :
100,000 pps (maxi-
mum for X/XA CPU
Unit)
1,000,000 pps
(maximum for Y
CPU Unit) 0001 86A0
hex
000F 4240
hex
2 Acceleration Ratio 0 (disabled) 1 (pulses/4 ms) At start of operation 290 00 to 15 0001Hex
: :
65535
(pulses/4 ms) FFFF hex
3 Deceleration Ratio 0 (disabled) 1 (pulses/4 ms) At start of operation 291 00 to 15 0001 hex
: :
65535
(pulses/4 ms) FFFF hex
Name Default Settings When setting is read
by CPU Unit
Internal
address
Bits Settings
1 Undefined Origin (oper-
ation for limit signal turn-
ing ON) Hold Hold At start of operation 392 12 to
15 0 hex
Undefined 1 hex
2 Limited Input Signal
Operation Search Only Search Only When power is turned
ON 380 04 to
07 0 hex
Always 1 hex
3 Limit Input Signal NC NC At start of operation 392 00 to
03 0 hex
NO 1 hex
4 Search/Return Initial
Speed 0 pps 0 pps At start of operation 383 and
382 00 to
15 0000 0000
hex
: :
30,000 pps 0000 7530
hex
5 Speed Curve Trapezium Trapezium When power is turned
ON 380 12 to
15 0 hex
S-shaped 1 hex